- Home
- Equipment
Refine by
Wille Geotechnik Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This Resonant Column is a high quality apparatus for measuring the low-shear Strain (less than 0.001%) or elastic modulus and damping properties of materials (e.g. wide variety of soils, rocks, Asphalt, etc) for solid- or hollow cylindrical samples under confined condition. It works based on the theory of wave propagation and used to vibrate the top of the soil specimen The device can work under ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
The Hollow Cylinder Apparatus enables the operator to apply rotational displacement and torque to a hollow cylindrical or soil specimen of soil. This modular testing apparatus is suitable for static and dynamic test and can simulate the complex loading conditions at a point in a soil Specimen. The device can also be used as a cyclic triaxial testing device by changing the upper and lower ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This Unique experimental testing system is a customized solution used to study the behavior of rock under various dimensional and compressive stress regimes. (σ1 ≠ σ2 ≠ σ3). This fits to the research goals of geothermal energy researchers, hydrologists, petroleum reservoir engineers and researchers in the mining section, geophysics and geotechnical ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This Triaxial set up operates tests under high pressure and high temperature conditions without the need of loading frame and is extremely quiet, making it an absolute low noise ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This series of Static Triaxial testing system is modular constructed and can be configured with a variety of sample adapters, Triaxial cells, pressure plates, automatic pressure controlling units, automatic volume measuring device , controlling and data acquisition system with different transducers and variety of software ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This series of Static Triaxial testing system is modular constructed and can be configured with a variety of sample adapters, Triaxial cells, pressure plates, automatic pressure controlling units, automatic volume measuring device , controlling and data acquisition system with different transducers and variety of software modules. These high-quality stress path triaxial testing systems are ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
This fully automatic stress path Triaxial and Uniaxial Test System is designed and manufactured to perform uniaxial and triaxial tests according to ASTM standards and suggested ISRM methods. The system includes a hydraulic loading frame with power pack and applies increasing load at a constant rate. This can be used to test various materials, from soft sandstone to high-strength rock or building ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
The combined modular rock direct shear and triaxial test system is designed to determine the shear strength of intact, joint rock or concrete samples.The frame is a high stiff frame which consists of 4 stiff columns and two actuators for vertical force and shear force, combined in a special configuration to avoid friction and torque to determine the shear strength and creep properties of rock ...
Manufactured by:Wille Geotechnik, Brand of APS Antriebs, Prüf- und Steuertechnik GmbH based inRosdorf, GERMANY
These High pressure High Temperature rock testing plants enable our customers to meet all test requirements in rock research testing per as ASTM standard or ISRM method. The modular system can be configured with a variety of hydraulic cylinders, power packs, different jigs and attachments in order to perform uniaxial compressive strength, triaxial strength, post failure, bending, indirect ...